Well, these cold months have really slowed my progress.
Managed to get a coat of epoxy on the bumper, and it looks like the waves in the top are pretty well gone.
I did find a few pinholes that needed filling, and with the primer I could see bumps around where the bumper repair shop had filled the holes left by the body kit.
So I skim coated those again, and sanded the bumper ready for another coat of epoxy.
Pulled the gill panels and rocks and gravel had worked in between the body kit and panel leaving a line of deep gouges.
Skimmed coated and sanded them out.
Also pulled the rocker panels.
The body shop (that primed the rear bumper) had primed these for me with a Beige epoxy. I just sanded them over and will shoot a coat of black epoxy on them.
So I just need a warmish (50+) day to heat up the garage and prime these parts.
Hopefully for the last time, and move on to the lower door repair and pull the rear fender flares.
Had a friend drop by and he said "Oh your painting your car", and I said "No. I'm sanding my car, and sanding and sanding and sanding"