79 camaro z28 436sbc/4speed build.bright cobalt blue metalli
The mar hyde sands like a dream....just hit bare metal with epoxy first...
Never argue with an idiot, he will drag you down to his level and beat you with experience.
|
|
Fully Engaged
Posts: 185
Joined: Tue Jan 24, 2012 3:09 pm Country: USA |
thx timbo,yeah i have a quart of epoxy for the bare spots,wish i could have found the epoxy in buff,but had to settle for grey.
|
Fully Engaged
Posts: 185
Joined: Tue Jan 24, 2012 3:09 pm Country: USA |
another beautiful day in michigan was 65 degrees again,spent the day working on my fender sanding it all down and feathering in the chips,the hardest part was getting the rock chips in the lower section smooth,cleaned it all with wax and grease remover and in few minutes will be laying my last coat of 2k primer.
By bad436z28 at 2012-03-07 By bad436z28 at 2012-03-07 By bad436z28 at 2012-03-07 By bad436z28 at 2012-03-07 |
Fully Engaged
Posts: 185
Joined: Tue Jan 24, 2012 3:09 pm Country: USA |
|
Fully Engaged
Posts: 185
Joined: Tue Jan 24, 2012 3:09 pm Country: USA |
timbo u were right that marhyde is awesome stuff,it sands smooth in seconds and the paper last a long time,usually i start block sanding with 180 but this i could start my block sanding with 320 then go up from there,best 2k primer i have used yet.
|
79, be sure to guide coat it and it.
Never argue with an idiot, he will drag you down to his level and beat you with experience.
|
|
Fully Engaged
Posts: 185
Joined: Tue Jan 24, 2012 3:09 pm Country: USA |
yeah timbo i will right now in just using some cheap leftover black primer,but i also have the dry guide coat to try,never used that before.
|
Pepper it with the cheap primer when wet sanding. I use both but not the dry when wet sanding.
Never argue with an idiot, he will drag you down to his level and beat you with experience.
|
|
Fully Engaged
Posts: 185
Joined: Tue Jan 24, 2012 3:09 pm Country: USA |
yeah i think im just gonna stick with the cheap primer for my guide coats,thats what im used to using and has worked great on all my other projects,so why hange,maybe i will try the dry guide coat on my quarters i havent decided yet.im kind of old school and have hard time changing my old ways when something works i been using already for years.
|
Fully Engaged
Posts: 185
Joined: Tue Jan 24, 2012 3:09 pm Country: USA |
did warm up today but late so didnt get as much done as i hoped for,tomarrow is supposed to be warmer so should be an eventful day i hope,did get my final sanding with 400 grit on my jam,and wiped it down really good with wax and grease remover before laying my 2 coats of 2k primer came out really good,all i need to do now is wet sand with 600 grit and there ready for paint but that wont be until later,then maybe i can finally get the door back on,need to get me one of those cool door hangers will make life much easier.
By bad436z28 at 2012-03-10 By bad436z28 at 2012-03-10 By bad436z28 at 2012-03-10 By bad436z28 at 2012-03-10 |
Return to Completed & In Progress Member Projects
Who is online
Users browsing this forum: No registered users and 109 guests