Hi guys, almost finished to collect all the gears i needed to start painting.In the previous days i scratched it down with Rotary 80grit and then 120 by hand.
Today i shot white primer, was my very first time painting with a big spraygun, im used to the airbrush for static models.
After 4 hours i wetsanded with 400,applied some filler and then used 220 on filler after it dried.
Tomorrow i will spray another 2 coat of primer.
Till now im very happy how it came out, set the gun at 2,5 bar, 1,4nozzle cheap spraygun,mixed at 5:1:1 at 30% thinner(saving my ani R150-t for basecoat and clear).
I set up my gun with full fan and 2and half turns out fluid, came out smooth, maybe a little dry (pressure too High?), but then i sprayed closer to the tank and the results were pretty good imo.
Any suggestions??
Would like to upload some pics, but cannot figure how to do from mobile phone.
Kawasaki z250 A1 1981
2 posts
• Page 1 of 1
Non-Lurker
Posts: 8
Joined: Fri Mar 04, 2016 11:52 am Location: Torre del greco- Napoli Country: Italy |
Driving
Kawasaki z1 '73 Fiat 600 trasformabile 2nd sr. Ducati 748 Under project: Honda 750 four k2 Kawasaki 1000 r Elr Fiat 600 1st sr |
down on bottom of page you will see a tab that has attatchment options. under the preview submit button for posting
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
2 posts
• Page 1 of 1
Return to Completed & In Progress Member Projects
Who is online
Users browsing this forum: No registered users and 62 guests