Page 683 of 900

Re: The BIG project thread

PostPosted: Tue Jul 10, 2012 3:12 pm
by Doug's 38 2dr sedan
You guys have really been making progress and both really look great. I think your Ideas on the engine bay of seal then shoot the color really saves a bunch of time. I also really don’t like all that tedious sanding. :goodjob:
Rob, it is amazing the number of great looking cars you have up there, I thought we had the corner of that down here in So Cal but all those cars are really impressive. :shocked: :shocked:
Dennis, not that you have any shortage of cars but I bet you will be glad to get the Vdub back on the road. :happy:

I have been working on the 38 and have reshot it (all but the TO DO body work on) in sealer primer and followed up with high build. . well I am a very inexperienced with painting and this was my first time to shoot high build. WOW it was like shooting stucco, for me real hard to keep a wet line and had no flow. Well I should have asked my friend but I didn’t :whoops: :whoops: :whoops: Boy when I told him he really got a big laugh and he asked did you reduce it? A very sheepish “no” was my answer. :rotfl: :rotfl: :rotfl: Here on out I will reduce it with some S L O W reducer and I bet it will work better for me. Live and learn . . . . . speaking of learning I found that my work is blocking Photobucket (messing with the format) and not allowing any coping of the IMG links. I found that I could get the links from my IPhone copy them into an email and send the links to work. Not that would ever do this of course.

The underside sealer primed
Image

The topside sealer primed
Image


High build
Image


Image


Image

Re: The BIG project thread

PostPosted: Wed Jul 11, 2012 10:51 am
by Doright
Wow! the 38 is looking good Doug

I got the VW going again all new cam lifters water pump timeing belt belts ran it at 2000 rpm half hour changed oil filtor then change oil and filtor again in 500 mi. then back to regular oil change schedual 5000.
Yes its nice to have my own car back

Re: The BIG project thread

PostPosted: Wed Jul 11, 2012 11:02 am
by rjuhasz
The 38 is looking great!! It's really coming along, can't wait to see it in color. I don't recall if you mentioned what the color will be?

I'm sure you're happy to get the Dub done Dennis, hope that's all iot needs for a long while.

How do you guys get anything done in the heat? Summer decided to show up last week, it was high 80's at the cabin, I'm running the chainsaw and I can't even see from the sweat pouring into my eyes :splat: :splat:

Re: The BIG project thread

PostPosted: Wed Jul 11, 2012 1:52 pm
by Doright
Been 110+ all week hear :knockout:

Re: The BIG project thread

PostPosted: Wed Jul 11, 2012 9:46 pm
by rjuhasz
Doright wrote:Been 110+ all week hear :knockout:


That would kill me :splat:

Re: The BIG project thread

PostPosted: Thu Jul 12, 2012 8:30 am
by Doug's 38 2dr sedan
I still have the firewall, cowl and the entire right side to do but it should go easier than the driver side. Remember I had damage from the caved in roof and a hit on the driver side so I am hoping :splat: :splat: :knockout:

It has been in the 80's here and the evenings down in the 60's quite nice actually :happy:

Re: The BIG project thread

PostPosted: Thu Jul 12, 2012 10:30 am
by rjuhasz
Hopefully the rest will go smoothly Doug, don't need any unexpected surprises :flatten: :flatten:

I'm spraying the flat black on the outside of the inner fenders today. Not much progress but at least it's some small bit that'll be finished :goodjob:

Re: The BIG project thread

PostPosted: Thu Jul 12, 2012 10:52 am
by Doug's 38 2dr sedan
Glad you are making some progress in the "done" department. I have notice that I have some bridging along some of the sheet metal trim that I can brake apart with my fingernail so it looks like I have allot of tricky sanding to do. :whoops: :whoops: I guess i have learned a lesson here but how come my lessons always require more work. :realmad: :flatten: :realmad: :cry:

I wont be getting anything done this weekend because we are have a birthday get together with about 50 guest so far. . . . :shocked: :knockout: :knockout:

Re: The BIG project thread

PostPosted: Thu Jul 12, 2012 3:05 pm
by rjuhasz
I'm not sure what you mean by the "bridging along the sheet metal trim"?

Oy, 50 guests, that's a lot of work :knockout: :knockout: :knockout:

I think it came out good, I don't want to notice anything in the wheelwells so I figured flat black was the ticket. I used Delfleet, I think it's a PPG fleet paint, quite inexpensive, sprayed easy and covered well :goodjob:


Image

Re: The BIG project thread

PostPosted: Thu Jul 12, 2012 3:18 pm
by Doug's 38 2dr sedan
Looks great :happy: :happy: :happy:

I'll post a pic after I email it to my iPhone and then upload it to Photobucket :knockout: :knockout: :knockout: :rotfl: Then mail the link back and paste it here :allgood:

Here are the spots that bridged. they were very ruff with over spray thin I hit them heavy so there was nothing under to adhere to :whoops: :splat:

Image