Question: what is the best product I could use, to be sure all the old chemicals from waxing and cleaning etc are removed (working on a 73 vette body, much abused) bofore painting.
Car has seen years of sun and weather and not much care.
Bill
working with old fiberglass (preping)
7 posts
• Page 1 of 1
Non-Lurker
Posts: 6
Joined: Tue Jun 07, 2016 2:44 pm Location: Kaministiquia, Ontario Country: Canada |
|
i use heavy dosh soap water and a red scotch brite. rinse with pressure was every few panels. repeat if you think its needed
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Yep, I like Dawn for that as well. The red pads are pretty aggressive and will pull off all that old crap. If you think there is anything further "stuck" on there you also might want to try a 50/50 mix of denatured alcohol and water. Working that Vette glass shouldn't be bad as the sun/weathering has probably already cooked off most of the old waxes/polishes.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
Non-Lurker
Posts: 6
Joined: Tue Jun 07, 2016 2:44 pm Location: Kaministiquia, Ontario Country: Canada |
Thanks for the information. I thought I'd have to use some "strong"mean liquid. This sounds a lot better, and much safer and easier.
|
With fiberglass "less" is "more" when it comes to chemicals. Strong chemicals can penetrate and get beyond surface resins, gel coats, etc., and get trapped in underlying "voids." You don't want stuff like that "gassing" back up through you new paint.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
Non-Lurker
Posts: 6
Joined: Tue Jun 07, 2016 2:44 pm Location: Kaministiquia, Ontario Country: Canada |
Never thought of the older chemicals "coming up through"the new paint on fiberglass. I do work with powder coating, and that is a concern with porous metals, another place to watch for it. Thanks
Bill |
Exactly, it is the same idea with fiberglass. I've seen some pretty strange stuff "bleed" out of fiberglass.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
7 posts
• Page 1 of 1
Return to Fiberglass and Plastic
Who is online
Users browsing this forum: No registered users and 61 guests