Hello there, I am wanting to paint my Vx Corsa D facelift grill in two colours Sapphire Black and Arden Blue. Due to lack of tools I am doing it with rattle cans and I have done it before and it went on really well but I managed to lose the grill on the road as the glue has cracked. I know from previous experience with it the grill would start to chip fairly quickly and because its Black or blue on the top and chromed plastic underneath its really visible. I want to make this a tough paint job that will not only look good but last some time!
From research I have came up with following procedure:
1. Clean with soapy water
2. Sand down with 240 and follow with 400
3. Clean with wax remover
4. Spray 2 coats of epoxy primer
5. Spray 2 coats of high build primer
6. Sand down with 600
7. Spray 2 coats of colour
8. Spray 3 to 5 light coats of clear
9. Let it dry and buff
Am I overdoing this or maybe should add ad promoter to that?
Thanks
Maciej
Painting Plastic Chrome Grill
2 posts
• Page 1 of 1
Non-Lurker
Posts: 1
Joined: Thu Jul 27, 2017 1:53 pm Country: United Kingdom |
|
when you sand with 400 does the chrome come off ?
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
2 posts
• Page 1 of 1
Return to Fiberglass and Plastic
Who is online
Users browsing this forum: No registered users and 32 guests