1.2/1.4 tips
3 posts
• Page 1 of 1
Non-Lurker
Posts: 4
Joined: Fri Apr 17, 2015 9:57 pm Country: USA |
getting ready to buy the eastwood concours gun with the 1.2 and 1.4 tips. do you guys think I can spray primer also with the 1.4 or should I get the 1.8 tip also. Im just going to be using a urethane primer/sealer....no high build stuff. thank you!
|
Just clean gun throughly after each use with spraying primer/sealer and you'll be fine..
|
|
1.4 for primer, especially if it's high build, is a bit on the small side and may need the product thinned a little more to get it spraying right. I use a 1.5 for a surfacer and 1.8 or 2.0 for high build or high solids primers.
Depending on your painting style 1.4 may also be a little big for base and clear. I use 1.3 for these, finding 1.2 too slow and 1.4 a little fast. I'm a medium speed painter. I'd say get the 1.8 and use it for your primer then practice with your 1.4 to get your technique right for both base and clear. Chris
|
|
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: NFT5 and 48 guests