My devilbus HVLP touch up gun has an 1.0 nozzle /tip.
Is the tip size usable for most paints and clear?
Noticed they recommend 1.3 or 1.4 most of the time on the tech sheets.
I this standard for most touch up guns ?
Larry
paint gun ?
5 posts
• Page 1 of 1
tech sheets are recommended specs for your normal full size gun. touch up guns are smaller with smaller spray pattern and will have smaller tip size. it will work fine for smaller jobs
|
|
You may need to reduce the clear to get it to atomize well.
|
|
thanks
This would also go for all type paints To reduce them as well? Larry |
|
Fully Engaged
Posts: 128
Joined: Sat Jun 15, 2013 10:17 pm Country: Canada |
My SRI Pro has a 1.0mm tip and I had no issues spraying SS metallic silver. Like others said you may have to reduce a tad. I did this mag in Endura EX-2C, which is a SS, urethane and they offered a clear coat (which is not typically used for SS) so I wanted to try it out as I never shot clear coat before.
|
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 72 guests