Hey all,
new here but have read enough threads to realize this is one of the most asked things,
i still cant figured out what i should be getting. basically ive got an engine bay back to bare metal and im painting 2k epoxy/primer/bc/cc, i do plan on painting more down the track.

i have a few old guns from the old man, a binks 7 and devilbiss jga. i thought i could possibly just use one of those for the epoxy+primer and get a relatively good hvlp for bc/cc with a budget around $200-350. any suggestions would be greatly appreciated!
oh and the air im using

DISP CFM: 15.1/ DISP L/M: 427\ FAD CFM: 11.3\ FAD L/M: 320\ HP: 3\ CYL: 2\ TANK: 54Ltr
ELECTRICAL SUPPLY: 15 AMP

ok decided to up my budget a little, what about a devilbiss gti for bc/cc? will my compressor
struggle to keep up?

thats a decent gun i have a few of those myself

Good to hear. I ended up going with the GPI instead.
Anyone used it?

nope but im sure it will work well for you. grats on the new gun, enjoy