Hey all,
new here but have read enough threads to realize this is one of the most asked things,
i still cant figured out what i should be getting. basically ive got an engine bay back to bare metal and im painting 2k epoxy/primer/bc/cc, i do plan on painting more down the track.
i have a few old guns from the old man, a binks 7 and devilbiss jga. i thought i could possibly just use one of those for the epoxy+primer and get a relatively good hvlp for bc/cc with a budget around $200-350. any suggestions would be greatly appreciated!
oh and the air im using
DISP CFM: 15.1/ DISP L/M: 427\ FAD CFM: 11.3\ FAD L/M: 320\ HP: 3\ CYL: 2\ TANK: 54Ltr
ELECTRICAL SUPPLY: 15 AMP
what gun to buy version 3404039
5 posts
• Page 1 of 1
Non-Lurker
Posts: 7
Joined: Fri Jun 17, 2016 11:28 am Country: Australia |
|
Non-Lurker
Posts: 7
Joined: Fri Jun 17, 2016 11:28 am Country: Australia |
ok decided to up my budget a little, what about a devilbiss gti for bc/cc? will my compressor
struggle to keep up? |
thats a decent gun i have a few of those myself
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Non-Lurker
Posts: 7
Joined: Fri Jun 17, 2016 11:28 am Country: Australia |
Good to hear. I ended up going with the GPI instead.
Anyone used it? |
nope but im sure it will work well for you. grats on the new gun, enjoy
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 84 guests