• Advertisement
 

Need some Plus Gun help (Narrow spray fan)

General Discussion. Make yourself at home...read, ask and answer!



Settled In
Posts: 74
Joined: Wed Dec 19, 2007 9:34 am
PostPosted: Fri Aug 14, 2009 2:04 pm
hey guys,
I have owned a Devilbiss plus gun for a few years and really like it for the most part (a little too much overspray but it makes up for it by laying down a great finish). Anyway, my gun is shooting a small fan of around 6-8 inches or so. I rebuilt it and it didn't seem to have any effect on the fan size. It's like the fan pattern screw has almost no effect on the pattern size until it's screwed in 3/4 of the way or so.

I used to open up the fluid and the fan and then screw the fan back in a tiny amount just to get rid of the wispy edges, but now the fan isn't big enough to even produce wispy edges. I can screw in the fan screw a few turns and see no change in pattern size at all. Any ideas as to what causes the spray pattern to be reduced in size???



Fully Engaged
Posts: 413
Joined: Tue Oct 16, 2007 5:18 pm
Location: Skokie, Il
PostPosted: Fri Aug 14, 2009 2:36 pm
Do you have an inline water trap or dessicant? If so, lose it and try again. If the fan returns to normal, you have an issue with the water trap restricting CFM.



Settled In
Posts: 74
Joined: Wed Dec 19, 2007 9:34 am
PostPosted: Fri Aug 14, 2009 10:39 pm
Thanks for the reply...
It's not a cfm issue as I measure after the dessicant and bulb moisture filter and set it at 40 psi at the gun (trigger held of course). Also, I can hook up any other gun to the end of the line and not have any problem at all???

Any other ideas?



Settled In
Posts: 33
Joined: Sun Dec 17, 2006 9:16 am
PostPosted: Sat Aug 15, 2009 9:37 am
The best idea is do what Len at the other forum you posted on said to do, call Devilbiss.



Settled In
Posts: 74
Joined: Wed Dec 19, 2007 9:34 am
PostPosted: Sat Aug 15, 2009 9:50 am
Will do,
I just wanted to use it to spray today or tomorrow, and the customer service center isn't open until Monday morning. I thought maybe a reduced spray pattern could be caused by a common problem and that someone may have run into something over the years that seems to cause this exact problem. It really shouldn't be dependent on the brand of gun, they all work with basically the same technology (Iwata excluded).



Top Contributor
Posts: 2986
Joined: Tue Sep 16, 2008 1:17 pm
Location: Pahrump NV.
Country:
USA
PostPosted: Sun Aug 16, 2009 7:56 am
I would completely dissemble and soak the gun in cleaner then scrub the parts lightly with soft brushes pay good attention to fan adjustment valve.
Bet you got a bunch of clear built up in there.
Those who sacrifice liberty for security deserve neither



Fully Engaged
Posts: 145
Joined: Tue Jun 27, 2006 1:53 pm
Location: Columbia, MO
PostPosted: Tue Aug 25, 2009 1:20 pm
Hey there Coletrain,
I noticed that you are in my area and we use the same gun... if you want we can compair notes on the gun.... I have GREAT luck using it. That is if you never got it to where you like it.
Tim



Non-Lurker
Posts: 1
Joined: Mon Jul 23, 2012 8:08 am

Country:
USA
PostPosted: Mon Jul 23, 2012 8:12 am
Hey coletrain, what was the final fix for your 670 plus spray gun fan issue? I have the same problem, it's driving me crazy. Thanks

Bill

Return to Body and Paint

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 50 guests