What's The Diference -- Suction & Pressure Feed Gun

General Discussion. Make yourself at home...read, ask and answer!

User avatar

Fully Engaged
Posts: 111
Joined: Fri Nov 25, 2005 2:12 am
Location: Central Texas
PostPosted: Tue Mar 02, 2010 2:50 pm
Thanks Bad six, and ODG --

I have 3 Sharpe suction feed guns, 2 HVLP's and one conventional that are just sitting there. Bought the Snap On hoping I could put parts together and get one good gun out of them.

Jim



Fully Engaged
Posts: 286
Joined: Tue Jun 10, 2008 5:21 pm
PostPosted: Tue Mar 02, 2010 3:44 pm
did you mean its way too bid odg, cause my devilbiss 1.6 is .063

User avatar

Top Contributor
Posts: 4273
Joined: Tue Jan 13, 2009 7:43 pm
Location: Charleston,SC
Country:
USA
PostPosted: Tue Mar 02, 2010 5:10 pm
Davvet2,,
You said you have a 0.70 " = 0.01778 mm,,,yes its to small.

1.5 mm = 0.059055"
1.4 mm = 0.055118"

.5 mm = 0.019685"
.4 mm = 0.015748"

User avatar

Fully Engaged
Posts: 111
Joined: Fri Nov 25, 2005 2:12 am
Location: Central Texas
PostPosted: Tue Mar 02, 2010 5:36 pm
ODG,

It's not here yet, I'm just trying to prepare for it when it comes.

The guy said it was .070.

Thanks,

Jim

User avatar

Top Contributor
Posts: 4273
Joined: Tue Jan 13, 2009 7:43 pm
Location: Charleston,SC
Country:
USA
PostPosted: Tue Mar 02, 2010 5:57 pm
See if he can get it with a 1.4mm or a 1.5mm fluid tip

User avatar

Fully Engaged
Posts: 111
Joined: Fri Nov 25, 2005 2:12 am
Location: Central Texas
PostPosted: Tue Mar 02, 2010 7:43 pm
ODG-

It was a closeout and I bought it as is --- I'll have to pull the parts off one of the other guns.


Thanks,

Jim

User avatar

Top Contributor
Posts: 4273
Joined: Tue Jan 13, 2009 7:43 pm
Location: Charleston,SC
Country:
USA
PostPosted: Wed Mar 03, 2010 4:23 am
Gotcha,,,I hope it all works out.



Fully Engaged
Posts: 286
Joined: Tue Jun 10, 2008 5:21 pm
PostPosted: Wed Mar 03, 2010 5:24 pm
Jim if its a .070 its a 1.8 tip. 1.6 is(.063) its a good size tip

User avatar

Fully Engaged
Posts: 111
Joined: Fri Nov 25, 2005 2:12 am
Location: Central Texas
PostPosted: Thu Mar 04, 2010 8:54 pm
thanks
Previous

Return to Body and Paint

Who is online

Users browsing this forum: Google [Bot] and 122 guests