Help. Cracks every where after applying primer

General Discussion. Make yourself at home...read, ask and answer!



No Turning Back
Posts: 977
Joined: Mon Jun 20, 2011 3:58 pm
PostPosted: Mon Jun 18, 2012 12:40 pm
Tell us what you did before applying the primer. Did you do any sanding on the old paint, and what kind of primer did you use?



Settled In
Posts: 63
Joined: Fri Mar 30, 2012 1:04 am

Country:
USA
PostPosted: Mon Jun 18, 2012 5:53 pm
It almost looks like the gun was spitting the primer in some spots instead of atomizing it. You should list all the products you used, gun tip size & prep before priming to get the best answer. If the primer is a 2k high build I & you prepped the surface correctly before applying it I would guide coat, then block it with 220 then fill any low spots & primer then block again



No Turning Back
Posts: 593
Joined: Mon Sep 06, 2010 5:34 pm
PostPosted: Mon Jun 18, 2012 8:29 pm
I'm tellin ya, if anyone knows trash in their primer, it's me.. and that's it! :D

User avatar

Top Contributor
Posts: 3110
Joined: Wed Dec 01, 2010 10:52 pm

Country:
USA
PostPosted: Mon Jun 18, 2012 9:57 pm
I don't see the cracks. I see poor prep and sanding along with trash prob from uncleanliness and lack of use concerning a tack rag...jus sayin.....what does anyone else see?

:knockout:
Never argue with an idiot, he will drag you down to his level and beat you with experience.

User avatar

Fully Engaged
Posts: 129
Joined: Sun Jan 02, 2011 5:01 pm
PostPosted: Mon Jun 18, 2012 11:54 pm
Was this done with a rattle can primer?
MissouriPaintSlinger

Do it right the first time.
Enjoy it for twice as long



Top Contributor
Posts: 1396
Joined: Thu Jan 27, 2011 2:16 pm
PostPosted: Tue Jun 19, 2012 7:53 pm
viewtopic.php?f=5&t=14772

viewtopic.php?f=5&t=16694

User avatar

Board Moderator
Posts: 9878
Joined: Fri Oct 20, 2006 12:40 pm
Location: ARIZONA
PostPosted: Tue Jun 19, 2012 8:35 pm
Anybody seen the OP lately?
1968 Coronet R/T


ACTS 16:31
Previous

Return to Body and Paint

Who is online

Users browsing this forum: Google [Bot] and 129 guests