what primer should I use
7 posts
• Page 1 of 1
Non-Lurker
Posts: 4
Joined: Sat Jul 12, 2014 11:41 pm Country: USA |
What primer should I use if I want to paint my truck kirker hot rod black. Thank you for answers.
|
I'd use a light or medium grey primer so you can tell you are getting coverage. If you are looking to block the panels down nice and flat and use a guide coat, then the Tamco primer I sell (and use myself) is one example that would work well.
http://www.autobody101.com/store/paint- ... allon-kit/ |
|
Non-Lurker
Posts: 4
Joined: Sat Jul 12, 2014 11:41 pm Country: USA |
Do I have to use the same brand prime?
|
Sure, you can use different brand primer. Your Kirker paint will be a urethane product, which means any modern 2K primer will be compatible underneath it.
You can't use a radically different product like a 1K lacquer primer underneath a urethane paint system. |
|
Non-Lurker
Posts: 4
Joined: Sat Jul 12, 2014 11:41 pm Country: USA |
Is it better to sand the primer and put the paint on or just spay the primer then the paint.
|
Generally, you use your (high build) primer as an opportunity to block the panels nice and flat, before paint. See the sticky in this forum titled "guide coat". It's a very important step in getting the final result to be correct.
Of course you could spray primer and then go to paint without sanding; if the car is already perfect with no bodywork many primers (including Tamco) specify adding reducer to the mix to "thin it out" as a sealer coat, which will go on nice and flat with less build - and give you a great surface to shoot your color coat over. |
|
The primer must be in the recoat window to paint over. Dried (cured) primer must be sanded.
|
|
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot], magee84 and 121 guests