henrymeasleyjr's Profile
E-mail henrymeasleyjr
Need some advice. I want to prime some motorcycle fairing this weekend but the temp is going to be in the mid to upper 60. Will it still be ok to spray and just give more flash time between coats.
Thanks in advance.
Spray some primer this weekend
4 posts
• Page 1 of 1
Settled In
Posts: 10
Joined: Wed Jul 30, 2014 6:11 am Country: USA |
 Posted: Mon Oct 20, 2014 1:54 am
|
 Board Moderator
Posts: 9897
Joined: Fri Oct 20, 2006 12:40 pm Location: ARIZONA |
Posted: Mon Oct 20, 2014 9:43 am
What type of primer are you spraying?
Most (including epoxy) will be okay above 50 degrees provided the temperature stays above 50 for at least 4 hours. You will want to be sure the solvent has flashed off properly before applying more coats. Trapping solvent in primer layers leads to blisters, cracking and flaking problems. 1968 Coronet R/T
ACTS 16:31 |
Settled In
Posts: 10
Joined: Wed Jul 30, 2014 6:11 am Country: USA |
Posted: Mon Oct 20, 2014 12:21 pm
I will be spraying finish 1 urethane 2k (FP410/FH411)
|
Board Moderator
Posts: 9897
Joined: Fri Oct 20, 2006 12:40 pm Location: ARIZONA |
Posted: Mon Oct 20, 2014 9:18 pm
Should be fine. Be sure to watch your flash times and wait even longer than recommended.
1968 Coronet R/T
ACTS 16:31 |
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 163 guests
The team
Delete all board cookies• All times are UTC - 6 hours [ DST ]Powered by phpBB© 2000, 2002, 2005, 2007 phpBB Group
Advertisements by Advertisement Management