Hey everyone, I haven't really done any wheel arch body lines, just repairing the wheel arch with a body line still intact.
How can I shape the curved line on a wheel arch?
On straight lines i use tape on each side, i tried using 1/2" tape on the wheel arch today and on the bottom half the tape curved with the body work but the top didn't curve as well.
Here are some pictures I found online(not mine) of a damaged wheel arch.
How would I get the same curved line as factory? Thinner tape?
Thanks.
How to get a good body line on wheel arch.
4 posts
• Page 1 of 1
Fly like a butterfly, sting like a bee.
|
|
I apply a lot of guide coat and make long sweeping sanding
strokes with a block. It shows it really well and you can see exactly when to stop. JC.
(It's not custom painting-it's custom sanding) |
|
Thanks for the reply and help JCCLARK.
Do you use a flat block or one of the long round blocks? Fly like a butterfly, sting like a bee.
|
|
I use both, here lately I have been using the round one most.
It's about 1" dia. JC.
(It's not custom painting-it's custom sanding) |
|
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: Drew, Google [Bot] and 104 guests