What do you seasoned pro's use in your plotter/cutters? I've got a small vinyl cutter and use vinyl but it's awefull sticky.
Thanks
paper backed masking film for cutter/plotter
10 posts
• Page 1 of 1
Settled In
Posts: 58
Joined: Wed May 25, 2016 9:17 am Country: USA |
|
What are you cutting ? I'll get you a part number tomorrow
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
* Banned *
Posts: 496
Joined: Sun Dec 02, 2012 11:33 pm Country: USA |
|
unbelievable work, Scott - really nice.
|
|
Fully Engaged
Posts: 392
Joined: Wed Dec 09, 2015 12:45 pm Country: USA |
I am not a pro and only do this for fun. The pro's might laugh, but I use clear Con-Tact shelf liner. Cheap and easy to get, conforms to curved surfaces, repositionable and even reusable in some cases, and does not leave any adhesive behind.
|
Settled In
Posts: 58
Joined: Wed May 25, 2016 9:17 am Country: USA |
I"m just using off the shelf vinyl material from amazon. It works well but is just sticky.
I'm cutting very small things out. Like lettering etc. |
* Banned *
Posts: 496
Joined: Sun Dec 02, 2012 11:33 pm Country: USA |
Gerbermask and Ultramask are low tack and repositionable. |
i use this for any cutting out graphics
http://solutions.3m.com/wps/portal/3M/e ... 64890&rt=d as far as spray mask and plotting ill get to you when my graphics guy gets in Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Top Contributor
Posts: 6235
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
Very Nice work Scott very nice
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
* Banned *
Posts: 496
Joined: Sun Dec 02, 2012 11:33 pm Country: USA |
Thank you. |
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: grump and 120 guests