base coat over clear
4 posts
• Page 1 of 1
Settled In
Posts: 12
Joined: Tue Feb 07, 2017 5:07 pm Country: USA |
hello everyone, so here is my dilema. stencil was not down all the way and paint got underneath, i already cleared and wet sanded with 1000 grit. my question is can i spray base over the sanded clear then re-clear, cut and buff....? i am new to painting so forgive me if this is a silly question. thanks for your help in advance.
|
yes that is the correct
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Settled In
Posts: 12
Joined: Tue Feb 07, 2017 5:07 pm Country: USA |
thanks painter dave
|
Settled In
Posts: 29
Joined: Mon Jan 02, 2017 2:44 pm Location: England Country: United Kingdom |
Yes, many airbrush artist's will carry out this process and use it to seal everything off before doing more work.
in the future try applying a 2k colour (black) first and let it cure then do your artwork. then if you get paint creep like above you can either use abit of thinner or tape up and rectify easily. Check out my Refinishing channel below!
http://www.youtube.com/c/repairrefinishtv |
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot], tomsteve and 207 guests