blending solvent for acrylic enamel single stage
6 posts
• Page 1 of 1
Settled In
Posts: 18
Joined: Sat May 21, 2016 10:05 am Country: USA |
Hey everybody! I got to do a little touch up work on a sail panel. Respraying the whole roof,sail panels and quarter panels is still on the table,still an option,still might just do it. BUT! If i knew what blending solvent to buy for acrylic enamel single stage, I would try that first,to save a lot of work. If I'm not happy with the results,I will do the whole panel,no biggie just willing to try ,but I don't know what to buy. Thanks
|
im not aware of different blending solvents, for a small panel a aerosol blending solvent should work fine
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Settled In
Posts: 18
Joined: Sat May 21, 2016 10:05 am Country: USA |
As I am shopping for blending solvent and seeing different kinds for different types of paint.
|
Top Contributor
Posts: 6776
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
back when a/c was the stuff we would use a slow reducer. I use to use DuPont Centari and you could blend the edges with 8022 or 8093 reducers.
Jay D. they say my name is Jay
|
Settled In
Posts: 18
Joined: Sat May 21, 2016 10:05 am Country: USA |
Thanks Jay! I was hoping you would see this! You helped me in the past and I still appreciate it! You always seem to be straight forward. So is it 100% reducer on the blend edges?
|
Top Contributor
Posts: 6776
Joined: Tue May 19, 2009 7:10 pm Location: OREGON COAST |
yes it will produce good results maybe not show quality but usable. I would shoot the A/C then have a detail gun with reducer only to blend the edge. be carful and not put it on heavy or it will run.
Jay D. they say my name is Jay
|
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 95 guests