Well my car is an 85 Buick regal T-type, I removed the door and tapped it off where I plan to cut, now I've never done this before, I plan to use a cut off wheel on my angle grinder. Any tips?
Front Corner
Underneath of front corner
Tapped off where I plan to cut, the cut is so big because i figured I might as well cut out all the dings too?
Rear corner
In the last picture you see it rusted through the door skin and also through the door frame.
Tips please
Sheet metal repair of door. w/PICS
3 posts
• Page 1 of 1
Fully Engaged
Posts: 285
Joined: Wed Mar 12, 2014 12:09 pm Location: Buffalo NY Country: USA |
|
Fully Engaged
Posts: 285
Joined: Wed Mar 12, 2014 12:09 pm Location: Buffalo NY Country: USA |
Bump any suggestions?
|
Suggestions:
1. reskin the door 2. look for a cleaner door from a salvage yard 3. continue the way you are going, but you have a lot of rust there to cut out and repair when the body of the door is that far gone I usually give up...there will be rust coming through the bottom that you will find as you go along. |
|
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 67 guests