If I spray my boat in sections, sometimes a few days between sections, will I be able to see where I left off...in other words will it look like "overspray" on the first section painted from painting the "new" section? If so, can I "blend" the two sections by "color sanding" process and "sand out" or "sand down" the overspray?
My other alternative is to mask the sections but there is no place I can tape where you would not see the line left after removing the tape. Can the "tape line" be sanded down and "blended" with the underlying paint? Maybe a stupid question...I just thought I would ask for some advice here and maybe a "trick" or two from you out there with so much more experience than me.
And speaking of overspray...what is the best method of removing overspray? I got some primer overspray on the paint on other parts of the boat that I am not painting.
John Murrill
Overspray
1 post
• Page 1 of 1
1 post
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 19 guests