Is it OK to spray another coat of clearcoat after the first coat of clearcoat that had been dried for days?
Thanks board for the help.
Is it OK to spray another coat of clearcoat after the first
3 posts
• Page 1 of 1
Sure, just make sure you sand it to give it a "mechanical tooth" so it doesn't delaminate later. I would sand with no less than 400 grit probably wet and go no higher than 500 or so if you want it to stick properly. Just make sure you really get good wet coats over the sanding of the clear.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
thank, I will try that.
|
|
3 posts
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: Google [Bot] and 35 guests