tackie clear

Discuss anything after that final masking comes off.
PostPosted: Fri Feb 04, 2005 4:42 pm
i just finished putting on the clear coat on my tailgate and i think i put it on to early and the clear was still a little tackie. I drove around for a day and now it has alot of dirt on it. I tried to just wash it off but it was stuck on top of the clear. I had let it try for 24 hours and was wondering if wet sanding it and buffing it would remove the debrea on it and if i should do it right away or wait i dont want the little rocks and dirt to be stuck on it if i let it try or would it be better to let it dry then sand and buff.

User avatar

Board Moderator
Posts: 6672
Joined: Tue Feb 24, 2004 7:00 pm
Location: central Ohio
Country:
USA
PostPosted: Sat Feb 05, 2005 9:37 am
What paint system and clear are you using? It might make a difference in what we tell you to do.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 48 guests