sanding for re-clearing
2 posts
• Page 1 of 1
Non-Lurker
Posts: 7
Joined: Mon May 05, 2014 5:19 pm Country: USA |
Hey guys.i sprayed a buddy's truck this past weekend and got some imperfections in the clear.i was going to try and wet sand and buff but I don't think I have enough coats of clear on it to do that.we ran out of clear before we could do a third coat.it has some orange peel and a few runs but also has a place where I hit it with the air hose that took it down to the base coat.my question is what grit sand paper would you guys use to sand with to re apply 2 extra coats of clear.the clear we used is the summit racing 2 stage clear.thanks
|
If it was me, I would use 600 grit......
"The number of parasites in the USA has now eclipsed the number of productive members of society"
Capt Rick Hiott. www.reelfishhead.com |
|
2 posts
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 59 guests