Removing dirt nibs need help
2 posts
• Page 1 of 1
Settled In
Posts: 86
Joined: Sun May 06, 2012 3:23 pm Country: USA |
Does anyone have any tips on removing dirt nibs & such without having to make the clear dull & buff or respray?
|
Fully Engaged
Posts: 144
Joined: Thu Feb 28, 2013 9:01 am Location: Ohio Country: USA |
If the paint/clear is still wet, then a pair of extra fine point jewelers tweezers (stainless steel!) and a very steady hand can save a lot of rework/buffing time. A clean, fine point sewing needle can sometimes work as well.
If it's dry, there's no magical solution. To minimize the area being affected, you can really isolate the imperfection using the Shim Mask by DeVilbiss. It's like the old drafting erasing shields from days gone by, but with openings better suited for automotive paint repair. Works much better than tape! Hope this helps! |
2 posts
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 50 guests