Hey guys, I painted my trunk lid and got a few VERY shallow fish eyes on it, can fish eyes be cut to make them diminished? I am OK if I can not remove them 100% but if I can make them less noticeable I will be happy.
I have the orange peel denim pads with Meguiars 105 heavy cut, I was hoping I can smooth them out a tiny bit with this method.
Fish eyes on single stage?
3 posts
• Page 1 of 1
Fully Engaged
Posts: 250
Joined: Thu Mar 29, 2012 11:16 pm Location: Shelton, CT Country: USA |
|
Fish eyes usually go to the bottom of the coat you were shooting, since there was some (surface) contamination that drove the paint away. But if you think they are shallow enough that you can sand them out, then sure. If a solid color SS. Metallics, no - you will shear the metallic particles and end up with tiny white specks all over.
|
|
Fully Engaged
Posts: 124
Joined: Thu Sep 04, 2014 12:16 pm Country: USA |
You can also mix up some clear and dab the fish eye with a tooth pick.
|
3 posts
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 44 guests