How to correct sand through on SS enamel color sand.

Discuss anything after that final masking comes off.



Settled In
Posts: 68
Joined: Sun Jan 29, 2012 5:27 pm

Country:
USA
PostPosted: Thu Feb 26, 2015 9:05 pm
I repainted the jeep with the same paint that I painted it a year ago. Tread " how to blend SS enamel in the middle of a panel" in body and paint. How would I address these sand through. I'm at the stage where I'm going to buff with super duty compound and 3m black foam pad, then 3m ultra machine compound with blue foam pad. I've wet sanded with 1500G and 2000G. One spot along light I had the tape move over the body about 1/4" about 1.5". The other 3 are about 1/8" spots. Do I paint with a small brush, let dry and gently wet sand then buff with rest of body or buff first then apply paint.
Attachments
IMAG0882.jpg
IMAG0883.jpg
IMAG0886.jpg
IMAG0888.jpg



Settled In
Posts: 68
Joined: Sun Jan 29, 2012 5:27 pm

Country:
USA
PostPosted: Thu Feb 26, 2015 9:11 pm
Also will the Dynabrade Orbital Attachment help with burning through and swirl marks. I've ordered the attachment for my Dewalt grinder. Thanks.

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 44 guests