hand buffing spots can't get to with buffer

Discuss anything after that final masking comes off.



Non-Lurker
Posts: 4
Joined: Wed Feb 16, 2005 12:23 pm
PostPosted: Fri Mar 04, 2005 3:18 pm
Ihave some spotsI cant get a buffer in and would like some, any advice
on hand rubbing it,s ppg single stage


thanks dave

User avatar

Board Moderator
Posts: 6672
Joined: Tue Feb 24, 2004 7:00 pm
Location: central Ohio
Country:
USA
PostPosted: Fri Mar 04, 2005 3:48 pm
You should be able to get small cotton buffs that fit on a drill or die grinder from a local paint jobber. If you don't have a local source you can get them from www.eastwood.com or www.supergrit.com Both companies carry them although supergrit might be a little cheaper.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 42 guests