Thanks for the link Dave.
Sure, Ill take part numbers on the pads.
Have you used 3m cutting compound "A"?
I'm using that now and it doesnt seem to get the 1500 grits scratches out, have read good things of m105 but have not tried it. It sounds like it will cut the 1500 out in not time.
May also be my pads.
Matching factory orange peel with waffle pad
14 posts
• Page 2 of 2 • 1, 2
Fly like a butterfly, sting like a bee.
|
|
Foam pads
use M105 and pad below http://3mcollision.com/products/buffing ... -inch.html Then i use Ultrafine with the pad and compound below http://3mcollision.com/3m-perfect-it-ex ... ounce.html http://3mcollision.com/products/buffing ... 05708.html hope this helps. my steps are 2000 wet for dirt nibs 3000 trizact on DA 5000 trizact on DA M105 on white foam 3M ultrafine on the light blue pad Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
Thanks for the info Dave. I will be investing in some m105 and trizact 3-5k paper.
Fly like a butterfly, sting like a bee.
|
|
yeah buddy no problem you will love it. you do need water with the trizact. i just use a squirt bottle
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
|
14 posts
• Page 2 of 2 • 1, 2
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 63 guests