Fixing Foobar

Discuss anything after that final masking comes off.



Settled In
Posts: 10
Joined: Sat Feb 28, 2009 4:28 pm
PostPosted: Mon Jun 27, 2016 8:15 am
I burned thru my clear coat and paint with 1000 grit :oops: . Now I need to fix it. I was thinking scuff with red scotch brite pad ( in burn thru area), spray new base, scuff the rest with grey scotch brite pad and then clear coat the whole panel again. Does this sound right????

Bob L.

User avatar

Top Contributor
Posts: 1745
Joined: Tue Apr 26, 2016 6:53 pm
Location: Denver, CO
Country:
USA
PostPosted: Mon Jun 27, 2016 8:34 pm
You will be fine basing over your 1000 and clearing
Experienced Trained Certified

SATA Spray Equipment Germany
Axalta ChromaBase Elite Standox Imron 5000 6000
PPG Delfeet Deltron Global Matthews
Sherwin Williams Ultra 7000 Genesis
Valspar DeBeer LIC
Akzo Nobel Sikkens Lesonal



Settled In
Posts: 10
Joined: Sat Feb 28, 2009 4:28 pm
PostPosted: Sat Jul 09, 2016 10:24 am
I fixed my burn thru, but now I have a hard line from the base coat. Can I sand the edges with 1000 grit to get it to blend better before I clear the entire panel?

Bob L.

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 43 guests