my boat has water spots and rings i cant get off. is gel coat buffable? if so can i use 3M Perfect-It compounds, and is it easier to burn than clear coat.
thanks
jerry
buffing gel coat?
2 posts
• Page 1 of 1
Settled In
Posts: 92
Joined: Thu Mar 17, 2005 7:21 pm Location: Phoenix, Arizona |
|
Gel coat is absolutely buffable. It usually is at least 20 mils thick on most boats, sometimes as much as 30 mils even. It's such a hard and thick materal I can't imagine buffing through it although you can remove enough material to cause a "carnival mirror" effect or wave. Your 3M stuff should work fine. You may just have to start out with a fairly aggressive compound. Just take your time.
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
2 posts
• Page 1 of 1
Return to Cut, Buff, Polish & Detail
Who is online
Users browsing this forum: No registered users and 62 guests