Removing water spots

Discuss anything after that final masking comes off.



Settled In
Posts: 41
Joined: Sat Oct 30, 2004 11:26 pm
Location: Las Vegas, NV
PostPosted: Sun Jul 10, 2005 11:46 pm
I have some water spots from the sprinkler system here in Las Vegas. What wax or rubbing coumpound should i use? Also do need a buffer? It's not bad but want it off.. Thanks
Visit my RHD RX-7 page: http://members.cox.net/goncalves6/

User avatar

Top Contributor
Posts: 1433
Joined: Mon Mar 29, 2004 2:02 am
Location: Hell
PostPosted: Mon Jul 11, 2005 12:48 am
You don't want wax, you want to clean it real good first. Wash it, then you should use a clay bar and see if that gets rid of it. If not then you can either use a mild cleaner/polish by hand or dual action polisher. If the spots are STILL there after that then DONT DRINK THE WATER IN LAS VEGAS.



Settled In
Posts: 41
Joined: Sat Oct 30, 2004 11:26 pm
Location: Las Vegas, NV
PostPosted: Mon Jul 11, 2005 12:50 am
Thanks
Visit my RHD RX-7 page: http://members.cox.net/goncalves6/

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 24 guests