• Advertisement
 

My clear coat is dull & rough from heat, what should I d

Discuss anything after that final masking comes off.



Non-Lurker
Posts: 3
Joined: Tue Apr 13, 2004 2:15 pm
PostPosted: Tue Apr 13, 2004 2:30 pm
I bought a 84' BMW that had Hawaii heat baking it. The clear coat on the roof and hood is dull, faded and very rough looking. What should I do to it make it look good so that I can sell it. ie:sand, buff, polish, compound. I don't know what to do because I'm new at this.



Fully Engaged
Posts: 350
Joined: Thu Mar 11, 2004 11:35 pm
Location: NNJ
PostPosted: Tue Apr 13, 2004 7:01 pm
If someone doesnt chime in with an answer Id check this link out> http://www.3m.com/us/auto_marine_aero/aad/solutions/detail/sc_01.jhtml

VERY informative! You may want to checl out some of the other pages too some real good stuff.

Also the thread below "Tips on color sanding and buffing" may have useful techniques (where it starts w/ the 1500G onward but Id use 2000 instead) for ur job in those really poor locations.

Return to Cut, Buff, Polish & Detail

Who is online

Users browsing this forum: No registered users and 6 guests