Anything goes in the world of fiberglass and plastic
you can make a mould from plaster ( the kind that is powder and u mix with water, believe its called plaster of paris?) coat the part in candle wax or something and fill a bowl with the plaster. then set the part in the plaster. then when its done u can lay the carbon fiber / resin in the mould. only thing is that its really difficult to do complicated pieces or pieces with lots of curves
I won't discourage you from doing it; the videos and tutorials make it sound and look simple but it is anything but. You will see
Joined: Wed Jan 05, 2005 3:25 pm
Location: Cincinnati, Ohio
this place has everything you need.
they also have how to videos on youtube.
they even have a great learning center.
this place also has some good instructions on a lot of different mold making along with fiberglass etc.
and they also sell the stuff.
anyone can you give me the cheapest seller of carbon fiber
Joined: Fri Oct 20, 2006 12:40 pm
I get my epoxy resins from here: http://www.westsystem.com/ss/ They also sell carbon fiber tape but I couldn't find any larger sizes.
I bought some on a roll last time but cannot remember where I got it. LOL
You will have to search for the type of weave and the quality of Carbon Fiber you want. This places sells the unidirectional cloth: http://www.tapplastics.com/shop/product.php?pid=99
Lots of places sell it but you have to read up on what a quality cloth is and how the weave itself plays a part in structural strength.
http://www.oppracing.com/opp_pages.php? ... _fiber_101
1968 Coronet R/T
Your posted videos were like watching AutoBody 101, "How it's Made" !!!
That was exceptional information.
Dad's J10, 1980 J10 Jeep Honcho,
Link to build pictures
Who is online
Users browsing this forum: No registered users and 1 guest