Paint droplet size
33 posts
• Page 2 of 4 • 1, 2, 3, 4
I like wide open best too. Behind the gun and on the strip. LOL!
Never argue with an idiot, he will drag you down to his level and beat you with experience.
|
|
,,W F O ,,Thats the only way to go!!!!
"The number of parasites in the USA has now eclipsed the number of productive members of society"
Capt Rick Hiott. www.reelfishhead.com |
|
It makes the spray pattern more narrow and focused when I choke down on my guns. It makes a more round pattern that is very hard to control compared to WFO or WOT with a correct sized tip and a normal fan. Then again, I stand by what I said before that you can choke down a little and make your 1.5mm tip work for base/clear, but it won't be as nice as a 1.4mm.
|
|
Thats cool,,,and I understand,,,Ill never make another comment about how to adjust a spray gun again unless I get a P.M. from someone.
"The number of parasites in the USA has now eclipsed the number of productive members of society"
Capt Rick Hiott. www.reelfishhead.com |
|
Why's that? I'm sure everyone would appreciate to hear what you have to say about adjusting a gun since you've been spraying for so long. There's room for everyone on this forum....
|
|
Fully Engaged
Posts: 313
Joined: Thu Sep 22, 2011 10:00 am Country: Greece |
More like the other way around. Troubleshooting guide:
http://www.sherwin-automotive.com/~/med ... e/tsg.ashx |
,,what in the world are you talking about now? Do you care to comment on what you just said?
"The number of parasites in the USA has now eclipsed the number of productive members of society"
Capt Rick Hiott. www.reelfishhead.com |
|
Never argue with an idiot, he will drag you down to his level and beat you with experience.
|
|
Fully Engaged
Posts: 313
Joined: Thu Sep 22, 2011 10:00 am Country: Greece |
Base needs a big tip size for coverage 1.3 - 1.7 , clear needs a smaller tip size for atomization unless you want to cut & polish.
Troubleshooting guide:
http://www.sherwin-automotive.com/~/med ... e/tsg.ashx |
Here we go again,,,Another incorrect answer.
You should use a 1.3-1.5 for base and a 1.4-1.5 for clear. You would NEVER use a 1.7 for base or clear................... "The number of parasites in the USA has now eclipsed the number of productive members of society"
Capt Rick Hiott. www.reelfishhead.com |
|
33 posts
• Page 2 of 4 • 1, 2, 3, 4
Who is online
Users browsing this forum: Google [Bot] and 205 guests