Lenny B's Profile
E-mail Lenny B
Hello Everyone,
I have a question I'm sure you guys will be able to answer. I'm doing my first paint job and I am wondering, once I get the poly and urethane primer totally blocked out and ready for paint, can I spray the epoxy sealer (1 coat or just enough for uniformity coverage), then 3 coats of base or as many that are needed (allowing 30 minutes to flash between coats as recommended), and the 3 coats of clear (allowing 30 minutes to flash between coats as recommended), all in the same day, back to back? Not sure if that is common practice or should I wait over night between stages. I do not want to scuff/sand if it is not necessary.
Thanks for the help ~ Lenny B
Rockie paint question
4 posts
• Page 1 of 1
 Fully Engaged
Posts: 252
Joined: Fri Apr 22, 2016 8:17 am Location: Detroit Country: USA |
 Posted: Wed Feb 15, 2017 11:42 am
|
 Top Contributor
Posts: 1755
Joined: Tue Apr 26, 2016 6:53 pm Location: Denver, CO Country: USA |
Posted: Wed Feb 15, 2017 12:12 pm
yep you can do all back to back waiting flash times.
30 minutes seems like a long flash time for clear. Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
Fully Engaged
Posts: 252
Joined: Fri Apr 22, 2016 8:17 am Location: Detroit Country: USA |
Posted: Wed Feb 15, 2017 12:56 pm
Thanks Dave. The flash time #'s were just for example. Thanks again.
|
Settled In
Posts: 70
Joined: Fri Feb 05, 2016 7:09 am Country: USA |
Posted: Thu Feb 16, 2017 6:33 am
Is this a Resto or a collision job ? Makes a difference
|
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: acro and 59 guests
The team
Delete all board cookies• All times are UTC - 6 hours [ DST ]Powered by phpBB© 2000, 2002, 2005, 2007 phpBB Group
Advertisements by Advertisement Management