Hi all!
I just want to thank the community for your help. I sprayed epoxy, base, and clear in the engine bay this past weekend. This was my first time ever painting a car with these materials, and I dont think I could have done it without your answers.
Since I can't upload images directly, please feel free to check out my Instagram (@240z_restomod) as I have videos, pictures, and really the whole restoration up there.
Thanks again all!
71' Datsun 240Z race car
11 posts
• Page 1 of 2 • 1, 2
Fully Engaged
Posts: 121
Joined: Tue Sep 01, 2020 11:55 pm Country: USA |
|
You can post images in this text box.
Scroll down to where the black section is and choose the Upload Images tab. Next window, select the Choose File button. Find the file on your computer, select it and then hit the Open button. Your file selection should now show in the Choose File box. Next click the Add the File button and then wait. The cursor will eventually jump back in this box. Place the cursor where you want the image to be placed. Scroll down below this text box to where the file is and then select Place In Line. 1968 Coronet R/T
ACTS 16:31 |
|
Fully Engaged
Posts: 121
Joined: Tue Sep 01, 2020 11:55 pm Country: USA |
|
Fully Engaged
Posts: 121
Joined: Tue Sep 01, 2020 11:55 pm Country: USA |
The black stuff is the 3M asphalt undercoating over 1-day old DTM epoxy. |
It will be interesting to see when it's done. Doesn't look like how I remember them but I never did own one.
1968 Coronet R/T
ACTS 16:31 |
|
Fully Engaged
Posts: 121
Joined: Tue Sep 01, 2020 11:55 pm Country: USA |
Two things to note. This is a race car with some pretty unique chassis mods, so I think most OEM folks would have a hard time recognizing the rad support area for instance. Also, the front fenders on a Z are enormous. Like, jag XKE huge. So with them off, it is definitly hard to recognize! The hood and hatch are fiberglass so the tube steel you see up front are for the front hood mounts which are quick-latch |
Fully Engaged
Posts: 121
Joined: Tue Sep 01, 2020 11:55 pm Country: USA |
Painted the interior today. Second time painting automotive paint. Flat black on everything driver-facing. The rest is silver. All products are Speedokote. Hot-rod black, metallic silver base coat, clear cost If anyone has some tips on polishing the clear, let me know! It’s the interior so it’s not worth a wet sand. Maybe some kind of a buff just to get rid of the dry-spray? |
Fully Engaged
Posts: 121
Joined: Tue Sep 01, 2020 11:55 pm Country: USA |
Interior has been completely refinished from bare-metal. First time ever spraying a car. I think it came out pretty good! Flat black in spots that are not prone to direct sunlight (heat sink) or are too close to the drivers field of view (glare).
All sprayable products from speedokote “Hot rod” black two component single application acrylic urethane Metallic silver base, clear coat urethane DTM epoxy sealer Enormous amount of hand sanding, scuffing, cleaning, and masking. Engine bay has quite a bit of runs, but I learned and have nearly zero runs inside. Still struggling with orange peel but that’s a premium problem to have for a complete novice. Thank you to all the folks who responded to my please. Special thanks to Chris for all the detailed explanations. Y’all are the best! |
Top Contributor
Posts: 6233
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
What motor and trany are u going to use ? Original type stuff?
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Fully Engaged
Posts: 121
Joined: Tue Sep 01, 2020 11:55 pm Country: USA |
Two setups: E-production class motor. Original L24 race prepared ~250hp but on race gas. 3.1L L28. Stroked and bored low tube race motor on 91 pump gas. ~300hp but a heck of a lot more torque than the L24 E-production has to run 4-spd as originally equipped but I have a 5 speed for the 3.1L Last edited by Ahajmano on Wed Aug 03, 2022 11:22 am, edited 1 time in total.
|
11 posts
• Page 1 of 2 • 1, 2
Return to Completed & In Progress Member Projects
Who is online
Users browsing this forum: No registered users and 71 guests