Just finished for a buddy... ********** black (Chromabase grey) and ********** Universal Clear.
1999 Lexus ES 300
15 posts
• Page 1 of 2 • 1, 2
Last edited by Han on Wed Jun 11, 2008 9:27 pm, edited 1 time in total.
A man can do all things if he but wills them.
|
|
Top Contributor
Posts: 1228
Joined: Wed Jan 28, 2004 1:37 pm Location: Santa Cruz, CA |
Very nice Han.......................................Working for your friend, translates to Have to do a great job for peanuts and a pat on the back right??
I need to get some of the ********** clear, is it pretty easy to lay down? I spray with an Iwata lph400. I have used lots of different clears and from what I hear the ********** Universal is great, its pretty cheap too!!!! Dr. Auto Car Repairs http://www.doctorautorepair.com
|
Fully Engaged
Posts: 313
Joined: Sun Apr 20, 2008 12:16 pm Location: NRH, Tx |
Looks like it turned out nice. Whole car repaint? Was it just old faded/peeling paint or what?
WWW.DodgeTrucks.org Administrator
1996 Dodge Ram 1500 5.9L Auto 2000 Dodge Ram 1500 5.9L Auto 2006 Toyota 4Runner SR5 4.0L V6 My Pix |
Yah, you all know how "buddy" deals go... It's for his wife actually.
His Mini Cooper is next (bumper and hood repair). Yes, it was complete paint job. It had minor dents everywhere, typical bumper scrapes, rock chips and such but over all in fair condition. Wouldn't mind having one of these for myself. Great cars. alexfleco, I shot this my LPH. 4 coats then lots of sanding and buffing. Polished out all the chrome trim, lamps, and wheels too. Pitted windshield replaced, the interior cleaned and leather condtioned. Cleaned engine bay, and scrubbed the wheel wells (this really does the trick)... And i epoxied sealed the front half... You'll like this clear for sure. A man can do all things if he but wills them.
|
|
Han thats beautiful work my friend.. and a beautiful car also
[Quote from Quincy Jones]
If you want more, Dream more!!!! |
|
Thanks fella's! I don't do too much allovers but when i do, it's **********.
Gonna try the SS black and MS clear or Euro clear next time. A man can do all things if he but wills them.
|
|
From what I am reading ********** is done with basecoats and most of what was in stock is sold out. Sure would like to see them continue with that Black because I have heard nothing but rave reviews. Han, that car sure looks sweet. Nice job! 1968 Coronet R/T
ACTS 16:31 |
|
Well then, I guess it's MS clear next time around!
A man can do all things if he but wills them.
|
|
Fully Engaged
Posts: 185
Joined: Wed Apr 16, 2008 11:11 am Location: MASSACHUSSETTES |
Clean man.. Nice...
How long did the cut n buff take you? knowledge is power, power is experience
|
Han stick with the HS, MS or Universal clear.. The Euro would be fine for collision panel repairs, but its not for your higher end work
It goes, HS the MS and the Universal as far as highest solid content... [Quote from Quincy Jones]
If you want more, Dream more!!!! |
|
15 posts
• Page 1 of 2 • 1, 2
Return to Completed & In Progress Member Projects
Who is online
Users browsing this forum: No registered users and 109 guests