Unbolted the bed and slid it back from the cab.
Bed front:
Can't see it in the pictures but there are dents on each side where the top of the bed had somehow been slammed into the cab.
1969 Chevy C10
1968 Coronet R/T
ACTS 16:31 |
|
Touched up black radiator support and around headlights:
Heater box had white caulk around it so I took care of that also: Started removing old seam sealer on roof drip edge: 1968 Coronet R/T
ACTS 16:31 |
|
Fully Engaged
Posts: 166
Joined: Mon Apr 27, 2020 8:17 am Location: Northeast N.J. Country: USA |
What are your plans for inside the bed.
A tintable bed liner might be the trick to save some prep and have a usable piece once it’s done. |
He plans to do the inside of the bed with a spray in liner later on.
I'll simply straighten the worst of it if I can and then leave it in epoxy primer. 1968 Coronet R/T
ACTS 16:31 |
|
Most of the seam sealer has been removed:
Started cleaning up the tight areas on the cab. Door jambs, window channels and seams as media blasting would only make a huge mess inside the cab since the under dash components are still installed. 1968 Coronet R/T
ACTS 16:31 |
|
1968 Coronet R/T
ACTS 16:31 |
|
Great job on this....can't wait to see it in that blue....
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!
|
|
I had mixed some white and black epoxy primer to produce a gray for the Freightliner I painted. Decided to use it up on this project.
Now to fix all the issues and get it ready for paint. 1968 Coronet R/T
ACTS 16:31 |
|
Top Contributor
Posts: 6217
Joined: Tue Sep 16, 2008 1:17 pm Location: Pahrump NV. Country: USA |
Looking good!
Dennis B.
A&P Mechanic, FCC General radio Telephone Operator Line Maintenance A&P Mechanic and MOC Tech specialist. |
Painted interior of cab today.
Waiting for some seam sealer to arrive before I get serious with the outside. Decided to take apart the gauge cluster since it needs work. Circuit film is in very bad shape. The rest is grease and grime. 1968 Coronet R/T
ACTS 16:31 |
|
Return to Completed & In Progress Member Projects
Who is online
Users browsing this forum: No registered users and 72 guests