Page 1 of 1

Wetsand and Detail - Black Mitsubishi Delica

PostPosted: Thu Jan 04, 2007 7:07 am
by Driven By Shine
Thought Id better post something up to start the section. No full car pics Sorry

Feel free to comment

I used a Festool Rotex in RO mode to dry sand with a Sia velvet 3000 grit disc then a Festool Platin 4000 grit disc then a rotary with a white Wolfgang (LC) pad and Pinnacle XMT2

After 3000 Sanding

Image


After 4000 Sanding (Notice the reflection coming back)

Image


After Rotary with White Wolfgang pad and Pinnacle XMT2

Image


After Rotary with White Wolfgang pad and Pinnacle XMT2 with a halogen

Image


Rear hatch area after 3000 sanding

Image


After 4000 sanding and Buffing

Image


Under lights (well the best I could get....they are to big to fit in the garage....the Delica's not the lights)

Image

PostPosted: Thu Jan 04, 2007 8:54 am
by Old Dupont Guy
A corser grit of paper would help you with that orange peel. I use 1200 dry and then buff. Looks great!

PostPosted: Thu Jan 04, 2007 9:48 am
by Han
Bling bling!

Was it necessary to sand it? Scratch removal?

That Frestool RO is expensive!!! Let me borrow yours. :)

ODG, I'm still waiting for that "video" you PROMISED to make.
Buffing out 600 grit? It's winter now so SHOW and TELL! :)

One of my "minor" goals for this year is to produce a FLAT mirror
like finish. I've got the swirly/holos removal down (it seems)...

PostPosted: Thu Jan 04, 2007 10:50 am
by Old Dupont Guy
Ha-Ha-Ha,,,I dont even have a video camera. But I do have a new digital Canon Rebel XTI. Ill take some pictures of the T/A whem Im done if you want to see them.

Whats this about "Buffing out 600 grit?"
The only time I use 600 is to remove trash in the clear and then I come back over that with 1200 dry D/A, then buff. Done!

PostPosted: Fri Jan 05, 2007 6:51 am
by Driven By Shine
Old Dupont Guy wrote:A corser grit of paper would help you with that orange peel. I use 1200 dry and then buff. Looks great!


Id say you are right the Old Dupont Guy. But I wasnt trying to remove Orange Peel......its a somewhat overkill approach I know but when I get these things straight off the boat from Japan they have that much crap on the paint that claybars last about one panel even the Claymagic Red arnt much good and there dear as....so the cheaper alternative is the mild sanding discs.....and its more fun anyway LOL

Chris

PostPosted: Fri Jan 05, 2007 6:53 am
by Driven By Shine
Han wrote:Bling bling!

Was it necessary to sand it? Scratch removal?

That Frestool RO is expensive!!! Let me borrow yours. :)

ODG, I'm still waiting for that "video" you PROMISED to make.
Buffing out 600 grit? It's winter now so SHOW and TELL! :)

One of my "minor" goals for this year is to produce a FLAT mirror
like finish. I've got the swirly/holos removal down (it seems)...


Was it necessary to sand? Not really as I said in the above reply its just a quicker way to get thru all teh gunk on the panels.

Yes the Rotex is expensive cost me down here almost $900 AU but feel free to come and try it anytime your passing by :lol:

Thanks for the comments

Chris

PostPosted: Fri Jan 05, 2007 9:53 am
by Old Dupont Guy
I understand. :wink: