Lost. Material Help

Anything goes in the world of fiberglass and plastic

Posts: 6
Joined: Wed Jul 15, 2020 3:45 pm

PostPosted: Mon Jul 20, 2020 7:59 am
I do so much reading I just get lost. I have 2 things I want to paint. First a plastic bumper on my car. I want to do it like the factory base coat, clear coat. What do I need? Small paint chips and one spot will need a very little filler. I just want to fix the rash, scuff and shoot. What primer do I need, I want to shot urethane base and clear 2k. I also read flex agent, no flex agent, it causes yellowing, mix matched paint colors. Do I need to prime the whole panel or just the filled areas? I would like to blend the clear to the edges to the factory paint on the edges that meet the fenders.

User avatar

Board Moderator
Posts: 5875
Joined: Tue Feb 24, 2004 7:00 pm
Location: central Ohio
PostPosted: Mon Jul 20, 2020 10:27 am
Chris, pretty much outlined how to handle bumpers here....
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!

Return to Fiberglass and Plastic

Who is online

Users browsing this forum: No registered users and 2 guests