Lost. Material Help

Anything goes in the world of fiberglass and plastic



Non-Lurker
Posts: 6
Joined: Wed Jul 15, 2020 3:45 pm

Country:
USA
PostPosted: Mon Jul 20, 2020 7:59 am
I do so much reading I just get lost. I have 2 things I want to paint. First a plastic bumper on my car. I want to do it like the factory base coat, clear coat. What do I need? Small paint chips and one spot will need a very little filler. I just want to fix the rash, scuff and shoot. What primer do I need, I want to shot urethane base and clear 2k. I also read flex agent, no flex agent, it causes yellowing, mix matched paint colors. Do I need to prime the whole panel or just the filled areas? I would like to blend the clear to the edges to the factory paint on the edges that meet the fenders.

User avatar

Board Moderator
Posts: 6672
Joined: Tue Feb 24, 2004 7:00 pm
Location: central Ohio
Country:
USA
PostPosted: Mon Jul 20, 2020 10:27 am
Chris, pretty much outlined how to handle bumpers here....
viewtopic.php?f=13&t=24768
Metal, wood, fiberglass, we work it all... www.furniturephysicians.com We can restore the irreplaceable!

Return to Fiberglass and Plastic

Who is online

Users browsing this forum: No registered users and 47 guests