Best way to remove a spot

Anything goes in the world of fiberglass and plastic



Non-Lurker
Posts: 8
Joined: Wed Mar 03, 2021 6:24 pm

Country:
USA
PostPosted: Mon Apr 05, 2021 12:17 pm
Shooting 1k urethane base on a piece of plastic when a drop of paint got on one spot. I dabbed it with a tack cloth and got the excess off but now im stuck with this spot.

What would be the best way to get that spot out before i put clear over the base?
Attachments
CDFF6D23-37DC-4761-B970-917A0F4437D0.jpeg

User avatar

Top Contributor
Posts: 1715
Joined: Sun Dec 16, 2012 4:46 am
Location: Canberra
Country:
Australia
PostPosted: Mon Apr 05, 2021 6:08 pm
Let it harden then sand back with P800, making sure that don't rub through. Grey Scotchbrite over the rest of the bar then clean, tack, blow and respray 1 medium coat over the whole thing. Clear as necessary.
Chris



Non-Lurker
Posts: 8
Joined: Wed Mar 03, 2021 6:24 pm

Country:
USA
PostPosted: Tue Apr 06, 2021 5:58 pm
NFT5 wrote:Let it harden then sand back with P800, making sure that don't rub through. Grey Scotchbrite over the rest of the bar then clean, tack, blow and respray 1 medium coat over the whole thing. Clear as necessary.


Thanks. I’ll try that

Return to Fiberglass and Plastic

Who is online

Users browsing this forum: No registered users and 8 guests