Need More Clear Coat

Anything goes in the world of fiberglass and plastic

User avatar

Settled In
Posts: 37
Joined: Mon Jul 29, 2013 7:59 pm
Location: Florida
Country:
USA
PostPosted: Thu Oct 20, 2022 1:08 pm
Sorry can't find other post.
I painted and clear coated rear bumper cover but had some places that didn't get enough clear coat.
Now I was told to sand and recoat.
ok I just wet sanded lightly with 1500 but can't tell much difference except where I had the rough looking spot. It is now smooth.
What now just cuff with a pad and respray the clear coat??

User avatar

No Turning Back
Posts: 774
Joined: Tue Oct 17, 2017 10:06 pm
Location: I live in a house
Country:
USA
PostPosted: Thu Oct 20, 2022 2:15 pm
Sand with 800
Use 3M Scuff it to clean
Use W&G remover - Make sure it is completely dry
Tack
Shoot Clear
Get impatient and stick your finger in it
Redo steps above and skip the last one
Sent by the random thoughts from the voices in my head...

Return to Fiberglass and Plastic

Who is online

Users browsing this forum: No registered users and 52 guests