I've been using Lord Fusor 153 for years and use it on all kinds repairs, but it has been discontinued in the 50 ml cartridge and is only available as 152 in a 300 ml cartridge. The 50 ml 153 lasts me a year or two which is beyond the shelf life to begin with, so a 300 ml cartridge of 152 would be mostly wasted. Not to mention I'd have to buy a new dispenser gun and a few dozen new tips which are also a lot more expensive. Any other brand that has a similar product in a 50 ml cartridge with a 3 minute minimum work time?

They still make and I do have their 142 in a 50 ml cartridge which is the same product except a faster cure time and only a 1 minute work time, but it's use is limited to one or repair spots on a damaged part before the product sets up in the nozzle. If I'm fixing a headlight with multiple broken tabs or cracks for example, I'd have to go through a few nozzles. Also wasteful.

are you repairing cracks ? or just deep scratches ?

Cracked and broken plastic parts.

atikovi wrote:Cracked and broken plastic parts.

this is what i use

https://semproducts.com/product/dual-mi ... rial/40887

Thanks but after some research, I found one of my sources selling the Fusor 152 in 210 ml cartridges for $55 which is pretty good if shipping isn't too bad. The 50 ml I bought two years ago was almost $20. Also found another place selling the dispenser for $47. Just have to source some knockoff mixing tips. $3 each is too much for the OG.