PainterDave wrote:hard to say buddy.
i dont use IC often.
but 30 minutes might be better.
But you must be using BC a lot? And aren't they the same (basically)?
Isn’t the DBC500 that you use an IC?
I have read a few posts about cross-linking and to wait long enough for the solvents to dry out, but not during the cross-linking process???
The TDS of the IC that I am using says:
Allow to flash 5-10 minutes between coats. After final coat application allow to flash at least 30 minutes but no more than 24 hours before application of a 2K polyurethane clear.
* What I still don’t understand is how long I can wait to add more IC (or BC in those other cases) – Is there a different Max time between coats of IC or BC?