High flow fittings
23 posts
• Page 1 of 3 • 1, 2, 3
 Fully Engaged
Posts: 220
Joined: Wed Mar 21, 2007 8:25 am Location: Dallas, TX |
 Posted: Fri Jul 01, 2016 3:11 pm
Where do you guys source high flow fittings? Is there a particular brand I should look for?
--carlos
|
projectPONY's Profile
E-mail projectPONY
 Top Contributor
Posts: 1755
Joined: Tue Apr 26, 2016 6:53 pm Location: Denver, CO Country: USA |
Posted: Fri Jul 01, 2016 3:16 pm
SATA or DeVilbiss
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
Fully Engaged
Posts: 220
Joined: Wed Mar 21, 2007 8:25 am Location: Dallas, TX |
Posted: Fri Jul 01, 2016 3:19 pm
Direct from their site or do you think the paint suppliers will carry them?
--carlos
|
Top Contributor
Posts: 1755
Joined: Tue Apr 26, 2016 6:53 pm Location: Denver, CO Country: USA |
Posted: Fri Jul 01, 2016 3:52 pm
yep paint suppliers can order if they do not stock them
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
Fully Engaged
Posts: 220
Joined: Wed Mar 21, 2007 8:25 am Location: Dallas, TX |
Posted: Fri Jul 01, 2016 4:07 pm
Great, thanks.
--carlos
|
Settled In
Posts: 38
Joined: Wed Sep 16, 2015 9:49 pm Country: USA |
Posted: Tue Jul 05, 2016 8:28 am
I just bought some from Farm and Fleet. Menards also has them listed.
|
Settled In
Posts: 27
Joined: Tue Jul 12, 2016 11:56 pm Country: USA |
Posted: Wed Jul 13, 2016 12:01 am
New to the forum and painting in general. Noticed a big pressure drop at the gun with longer hoses. Would high flow fittings help with the pressure drop or is that hose length mainly?
I saw some high flow kits on Amazon and elsewhere with good reviews. Probably worth a shot. Thanks! |
Top Contributor
Posts: 1755
Joined: Tue Apr 26, 2016 6:53 pm Location: Denver, CO Country: USA |
Posted: Thu Jul 14, 2016 8:50 pm
High flow helps everything to do with HVLP or RP compliant spray equipment. Don't go over a 40 foot hose and less if you can.
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
Settled In
Posts: 27
Joined: Tue Jul 12, 2016 11:56 pm Country: USA |
Posted: Thu Jul 14, 2016 9:33 pm
Cool! Only hoses I have are 50' and 100' so I'll stick with the 50' unless I'm painting a fence or something. I'll order up some high flow fittings before my next spray. Any recommendations on a reasonably priced setup?
Thanks for the info! |
Top Contributor
Posts: 1755
Joined: Tue Apr 26, 2016 6:53 pm Location: Denver, CO Country: USA |
Posted: Fri Jul 15, 2016 12:12 am
I personally use Devilbiss but prevost ? Might be right name makes some too.
Experienced Trained Certified
SATA Spray Equipment Germany Axalta ChromaBase Elite Standox Imron 5000 6000 PPG Delfeet Deltron Global Matthews Sherwin Williams Ultra 7000 Genesis Valspar DeBeer LIC Akzo Nobel Sikkens Lesonal |
23 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 57 guests
The team
Delete all board cookies• All times are UTC - 6 hours [ DST ]Powered by phpBB© 2000, 2002, 2005, 2007 phpBB Group
Advertisements by Advertisement Management