Need Help with Asturo 878WB Fan Control

Any questions about tools or supplies. Post your compressor/gun questions here.



Non-Lurker
Posts: 1
Joined: Thu Jan 15, 2015 5:11 pm

Country:
USA
PostPosted: Thu May 25, 2017 8:56 am
I have an Asturo 878WB detail gun. It's my understanding that this Taiwanese gun is also sold as the ATD Leonardo 6910 or Qualspray QS-125WB.

The fan control of my gun stopped working. I've been through the gun multiple times, everything is clean and tight. My best guess is the oddly shaped metal diverter (shown in the first photo) is not supposed to be loose and fall out when the adjuster part of the fan control is removed.

I've seen the inside of another gun and the diverter is at the bottom fan control hole with the notch on the left. I can't understand how this works if the slide is all the way at the bottom because the back end of the slide will partially block the fan control ports that can be seen in the second photo.

I'm hoping that someone with more knowledge of paint guns can help me figure out what to do to repair this gun.

Image


Image

Return to Tools and Supplies

Who is online

Users browsing this forum: Doright and 53 guests