DA Problem

Any questions about tools or supplies. Post your compressor/gun questions here.



No Turning Back
Posts: 872
Joined: Thu Jan 27, 2011 2:16 pm
PostPosted: Fri Dec 01, 2017 12:52 pm
SpeedThrills wrote:Yeah I just saw that consumption under load spec last night.
Anyone looking to buy a DA? lol :oops:


unfortunately,beings how i have 2 DA's i dont use, no.

i found a porter cable 7424 (electric)does a pretty good job at stripping paint,though.



Non-Lurker
Posts: 8
Joined: Fri Nov 24, 2017 8:47 pm

Country:
USA
PostPosted: Sun Dec 03, 2017 10:37 pm
Well I have a 3/8 hose I can put high flow fittings on. I'll probably still run out of air, but its a cheap idea to try. I've never used high flow fittings. Anything on this page that'll work?
https://www.amazon.com/s/ref=nb_sb_ss_i ... nk21494-20
I also have to remove the regulator and try that. I tried opening it up all the way (115 psi), same result.



No Turning Back
Posts: 872
Joined: Thu Jan 27, 2011 2:16 pm
PostPosted: Mon Dec 04, 2017 9:32 am
for your air fittings, i suggest milton brand.

User avatar

Board Moderator
Posts: 6956
Joined: Fri Oct 20, 2006 12:40 pm
Location: ARIZONA
PostPosted: Mon Dec 04, 2017 5:19 pm
SpeedThrills wrote:Well I have a 3/8 hose I can put high flow fittings on. I'll probably still run out of air, but its a cheap idea to try. I've never used high flow fittings. Anything on this page that'll work?
https://www.amazon.com/s/ref=nb_sb_ss_i ... nk21494-20
I also have to remove the regulator and try that. I tried opening it up all the way (115 psi), same result.


CFM is a measure of Volume
PSI is a measure of Pressure

These are not the same so raising the pressure will not help increase the volume.
1968 Coronet R/T


ACTS 16:31
Previous

Return to Tools and Supplies

Who is online

Users browsing this forum: No registered users and 3 guests