Recommended filter set up
Posted: Fri May 10, 2019 9:40 pm
Hi, I am new to the forum but have spent the last few weeks doing a lot of reading on the forum and am impressed on so many knowledgeable people on this site so I am hoping I can get some good suggestions.
Al little background on my set up-
I bought a new 80 gallon compressor that puts out 155 PSI and 16.1 CFM @. 90 PSI.
I am running about 60’ of 3/4 copper pipe with drain valves at each drop leg.
My question is when it comes to the filter system. I’m trying to decide what way to go. I am looking at a 1/2” compressed air inline filter/regulator, Desiccant dryer and a Coalescing filter set up OR a 3/4 combo particulate & Coalescing filter with a regulator.
Any insight, recommendations or thoughts would be greatly appreciated.
John
Al little background on my set up-
I bought a new 80 gallon compressor that puts out 155 PSI and 16.1 CFM @. 90 PSI.
I am running about 60’ of 3/4 copper pipe with drain valves at each drop leg.
My question is when it comes to the filter system. I’m trying to decide what way to go. I am looking at a 1/2” compressed air inline filter/regulator, Desiccant dryer and a Coalescing filter set up OR a 3/4 combo particulate & Coalescing filter with a regulator.
Any insight, recommendations or thoughts would be greatly appreciated.
John